Metek uSonic-2 - Page 4

METEK GmbH uSonic-2
4
Chapter 4 Analog data output (option) Page 25
4.1 General function of analog output Page 25
4.2 Configuration of analog output Page 25
4.2.1 Limitation of range (offset) Page 25
4.2.2 Scaling of analog output signals Page 26
4.2.3 Choice of values for the analog output function Page 27
4.2.3.1 Test values OA=32 Page 27
4.2.4 Indication of errors by analog output Page 29
4.2.4.1 Definition of an error Page 29
Chapter 5 NMEA - protocol Page 30
5.1 Possible settings for command NO Page 31
Chapter 6 Parameters and commands Page 33
Overview of all parameters and commands Page 33
Chapter 7 Internal data logger Page 50
Function and operation of the internal data logger Page 50
Appendixes
Appendix A Technical data Page 52
Appendix B Calibration procedure Page 54
Appendix C Mechanical drawing Page 55
Appendix D Allocation wind components Page 56
Appendix E Assembling the connector Page 57
Appendix F Packing Page 58
Appended to this manual you will find a CD-ROM with additional software.