Meto mn-4 - Troubleshooting Common Issues; Problem Diagnosis and Solutions

E-4203 42
6
6.0 Introduction
Occasionally situations occur that require some troubleshooting skills.
Possible problem situations and potential solutions are listed in this
section. While not every situation is addressed, you may find some of
these tips helpful. After the correction action is taken press the feed
button to clear the alarm. Contact a qualified service technician for
problems that persist or are not covered in this section.
Problem Situation Page
Unacceptable print quality 36
The Printer does not print or prints several labels at once 36
The ribbon does not advance 36
Skips every other label 37
Unable to print in rotation 4 37
Prints light on the right side of the label 37
Printer fails to turn on 37
Label advances 1-2 inches before a fault indication 38
Label advances 16 inches before a fault indication 38
Tracking Problems 38