17.9.2007 Rev. 2.4
Troubleshooting
15
Water basin has no water or water
runs out during cycle
Overflow pipe of the basin is not at the
right place
Set the pipe on the right level or renew it
Dirty nozzles Clean or change the nozzles
Water basin leaks Find the leakage and fix/change the ba-
sin
Sieve of the water valve is blocked Clean the sieve
Water spraying does not function The water pump does not function Check the pump, change if needed
The suction sieve of the water basin is ob-
structed
Clean the sieve
The waterpipes are obstructed Clean the waterpipes
The nozzles are obstructed Clean the nozzles
Appliance does not stop when the
container is filled
The thermostat of the ice-cube container Check the probe, adjust/change the ther-
mostat
Safety thermostat for overheating
stops the appliance
The water supply valve does not open Change the pressure switch
Check the valve, change if needed
The water condenser is obstructed Clean the water condenser (slime re-
moval)
The apparatus receives no water Check the water supply
Appliance stays in function during
the cooling phase
Malfunctioning thermostat of the evapo-
rator
Change the thermostat
The reel of the warm gas cooling valve Change the reel
The slide pulse is stuck Change the slide pulse
The curtain is in wrong way Change the curtain in right way
Collects ice under the evaporator or
frozes throughout
Malfunctioning thermostat of the evapo-
rator
Change the thermostat
Warm gas valve leaks Change valve
The slide pulse is stuck Change the slide pulse
The apparatus has not enough liquid Find leakage, fix it, vacuumize and fill
up
Irregular or incomplete melting Lack of water Check water supply of the evaporator
Not enough liquid Find leakage, fix it, vacuumize and fill
up
Dirty evaporator Clean the evaporator (cautiously)
The water valve does not get closed Change the valve
Change the RC-cover of the pressure
switch
Lack of water Water supply or drain pipe is not connect-
ed
Check the connections
The water pump leaks Change the pump
Bad pipe connections Check the pipe connections
Plastic drain water coupler is broken Check fix/change
Irregular ic -cubes Lime containing water
The nozzles are improperly directed Aim the water jet in the middle of the
cup
Noisy or leaking water pump Malfunctioning bearings Change the pump
Mounting of of the pump/plate is loose Check the attachment of the pump
Malfunctioning axial seal Change the pump
Seal in the pump chamber leaks Change pump
To Next Page
Loading...