To Next PageTo Next Page
Need help?Do you have a question about the Metra Electronics 99-7011 and is the answer not in the manual?
General| Color | Black |
|---|---|
| Vehicle Compatibility | Nissan |
| ISO DDIN radio provision | Yes |
| Wiring Harness | Not included |
| Antenna Adapter | Not included |
| Nissan Compatibility | Yes |
| Manufacturer | Metra Electronics |
| Part Number | 99-7011 |
| Product Type | Dash Kit |
| Material | Plastic |
| Painted scratch-resistant matte black | Yes |
| Type | Dash Kit |
Disconnect battery and remove initial dash panels around the glove box.
Remove radio chassis, hazard switch assembly, and center dash components.
Secure hazard switch and snap a/c vents into the new radio housing.
Use factory clips removed during disassembly to attach components to the housing.
Install a single DIN radio with the provided pocket into the dash assembly.
Mount ISO brackets, slide radio into housing, and attach trim plate and pocket.
Prepare housing, attach brackets, slide unit, and install trim plate for double DIN or stacked ISO.
Make wiring connections using EIA color code and recommended methods (strip, splice, solder, tape).
Reconnect battery, test unit, and reassemble dash in reverse order of disassembly.
