Metra Electronics 99-7804B - Dash Disassembly (cont.); Remove Top Radio Screws; Remove Radio Assembly; Remove A;C Vents

99-7804B
Dash Disassembly
5. Remove (2) Phillips screws on top
of radio. (Figure E)
6. Unclip and remove the radio
assembly. (Figure F)
7. Remove (1) Phillips screw from
each A/C vent then unclip and
remove the vents. (Figure G)
8. Remove (2) Phillips screws
securing the hazard light switch
and retain for kit assembly.
Continue to kit assembly
(Figure E)
(Figure G)
(Figure F)