Metra Electronics 99-7875 - Kit Preparation; Install Hazard Switch and Secure Vents; Secure Climate Controls and Trim Panel; Attach Clips to Radio Housing

99-7875/99-7875T KIT PREPARATION
PAS
SENGER
AIRBAG
3
1
Secure the climate controls into the
radio housing using the factory hard-
ware from rear. ( Figure C)
Snap the hazard switch/passenger air
bag light assembly into the radio
housing from front. (
Figure A)
3
Secure the a/c vents into the radio
housing using the factory hardware
from rear. ( Figure B)
2
Attach the clips to the back of the
radio housing. ( Figure E)
5
Secure the trim panel onto the radio
housing using the factory hardware.
( Figure D)
4
Continue to kit assembly.
D
B
C
E
A
HONDA ACCORD 2008-10 / CROSSTOUR 2010