Metrohm PGSTAT128N User Manual

Insert new module for the Autolab 8-Series
25 | Page
Figure 26 – The experimentally determined value of C1 is reported in a Message box at the end of
the measurement
9. Open the Hardware setup of Nova (Tools – Hardware setup). Select the instrument
type in the Main Module frame in the hardware setup window and adjust the
value of C1 to the value reported in the Message box
4
(see Figure 27).
Figure 27 – Change the value of C1 to the value reported in the Message box
4
It is possible to copy and paste the contents of the Message box.

Metrohm PGSTAT128N Specifications

General

Brand	Metrohm
Model	PGSTAT128N
Category	Measuring Instruments
Language	English