Metso ND9100H - Table of Contents

2 7 ND91H 70 en
READ THESE INSTRUCTIONS FIRST!
These instructions provide information about the safe handling and operation of the intelligent valve controller.
If you require additional assistance, please contact the manufacturer or manufacturer's representative.
Addresses and phone numbers are printed on the back cover.
SAVE THESE INSTRUCTIONS!
Subject to change without notice.
All trademarks are property of their respective owners.
Table of Contents
1 ND9000 PRODUCT FAMILY SUMMARY ....... 3
1.1 Key features........................................... 3
2 ND9100H INTELLIGENT VALVE CONTROLLER
WITH HART COMMUNICATION..................... 4
2.1 General .................................................. 4
2.2 Technical description ............................ 4
2.3 Markings ................................................ 4
2.4 Technical specifications ........................ 5
2.5 Recycling and disposal ......................... 6
2.6 Safety precautions ................................. 6
3 TRANSPORTATION, RECEPTION AND
STORAGE ....................................................... 6
4 MOUNTING...................................................... 7
4.1 General .................................................. 7
4.2 Mounting on EC and EJ actuators......... 7
4.3 Mounting on Metso actuators with
VDI/VDE mounting face ......................... 7
4.4 Mounting on linear actuator of
nelesCV Globe....................................... 8
4.5 Mounting on linear actuator with
IEC 60534 mounting face ...................... 8
4.6 Piping..................................................... 9
4.7 Electrical connections.......................... 12
5 LOCAL USER INTERFACE (LUI) ................. 13
5.1 Measurement monitoring ..................... 13
5.2 Guided start-up.................................... 13
5.3 Configuration menu ............................. 14
5.4 Mode menu.......................................... 14
5.5 Configuration parameters .................... 15
5.6 Valve travel calibration......................... 17
5.7 Special displays................................... 18
5.8 HART write protection.......................... 19
6 MAINTENANCE............................................. 19
6.1 Prestage............................................... 19
6.2 Spool valve assembly .......................... 19
6.3 Communication circuit board .............. 20
7 ERROR MESSAGES..................................... 20
7.1 Failsafe errors ...................................... 20
7.2 Alarms.................................................. 20
7.3 Errors ................................................... 21
7.4 Warnings.............................................. 21
7.5 Notifications ......................................... 22
8 TROUBLE SHOOTING.................................. 22
9 ND9100H/K00, ND9100H/I00
(WITH LIMIT SWITCHES) ............................. 23
9.1 Introduction.......................................... 23
9.2 Installing ND9100H/K00 or ND9100H/I00
on a valve controller............................. 24
9.3 Electrical connections.......................... 24
9.4 Adjustment........................................... 24
9.5 Removal of the limit switches
ND9100H/K00 and ND9100H/I00
for accessing the valve controller........ 24
9.6 Circuit diagrams .................................. 24
9.7 Maintenance ........................................ 24
10 TOOLS........................................................... 24
11 ORDERING SPARE PARTS ......................... 24
12 DRAWINGS AND PARTS LISTS .................. 25
12.1 Exploded view and parts list, ND9100H. 25
12.2 Exploded view and parts list,
ND9100H/K00 and ND9100H/I00........ 26
12.3 Mounting parts for E_05-14 actuators,
rising signal opens valve ..................... 27
12.4 Mounting parts for B1C/B1J6-20
actuators .............................................. 27
12.5 Mounting parts for B1C/B1J25-50,
B1C502 and B1J322 actuators............ 28
12.6 Mounting parts for Quadra-Powr®
actuators .............................................. 28
12.7 Mounting parts for linear actuators of
nelesCV Globe..................................... 29
12.8 Mounting parts for linear actuators with
IEC 60534 mounting face .................... 30
12.9 Connection diagrams .......................... 31
13 DIMENSIONS ................................................ 35
14 EC DECLARATION OF CONFORMITY ........ 36
15 TYPE CODING .............................................. 37