Metso R Series - Series RE, RE1 Parts Breakdown

3 R 74 en 17
10.2 Series RE, RE1
Spare part category 1: Recommended soft parts, always needed for the repair. Delivered as a set.
Spare part category 2: Parts for replacing of the seat. Delivered as a set.
Spare part category 3: Parts for replacing of the closing element.
Spares for the full overhaul: All parts from the categories 1, 2 and 3.
26 10 19 17
35 35
16
20
9
30
24
32
25
456
11
13
12 14 3 15
456
4
1
RE150 - 400
RE025 - 100
22
6
5
4
33
33
4A
E SEAT
S SEAT
T SEAT
1S SEAT
Item Qty. Description Spare part category
11Body
3 1 Segment 3
41Seat 2
4A 1 Back ring 2
5 1 Lock spring
61Back seal
9 1 Gland follower
10 1 Blind flange 3
11 1 Drive shaft 3
12 1 Shaft 3
13 1 Key 3
14 1 Cylindrical pin 3 (Cat. 2 for sizes 01"–02")
15 1 Taper pin 3 (Cat. 2 for sizes 01"–02")
16 1 Bearing 3
17 1 Bearing 3
19 1–2 Sealing plate 1
20 3–4 Packing 1
22 1 Filling ring (only in new low Cv version)
24 2 Stud
25 2 Hexagon nut
26 2–4 Hexagon bolt
30 1 Retainer plate
32 2 Spring stack
33 2 Back-up ring
35 1 Identification plate