CHAPTER 4: QUICKFLY RIGGING
33
SAFETY GUIDELINES FOR THE MCF-750
CASTER FRAME
•Do not stack more than three cabinets on the MCF-750
caster frame.
•Use straps when transporting 750-LFC loudspeakers that
have not been fitted with the MRK-750 rigging kit.
•To avoid tipping, transport stacks with loudspeakers linked
and locked at 0-degree splay angles.
•Forklifts should only be used to move the MCF-750 caster
frame when cabinets have been outfitted with the MRK-750
rigging kit and the cabinets have been securely linked.
•When lifting a stack with a forklift, always keep the forks
wide and close to the caster frame’s wheels. Failing to do so
may bend the caster frame or cause the stack to tip.
•When groundstacking 750-LFC loudspeakers with the
caster frame, make sure that all four caster wheels are
blocked to prevent the stack from rolling away.
CAUTION: The caster frame must be removed
before flying a loudspeaker array.
To Next Page
Loading...
Need help?
General
