Meyer Sound MILO - Electrical Safety Issues

8
CHAPTER 1
ELECTRICAL SAFETY ISSUES
Pay close attention to these important electrical and safety
issues.
!
CAUTION: Do not use a power cord
adapter to drive the MILO loudspeaker from
a standard three-prong Edison outlet since that
connector is rated for only 15 amps (NEMA 5-15R;
125 V AC max.).
!
CAUTION: The MILO loudspeaker requires a
ground connection. Always use a grounded
outlet and plug.
TIP: Use the ring located in the rear to
the side of the amplier on the MILO
loudspeaker to provide strain relief for power and
signal cables. Do not use this ring for any other
purpose.