CHAPTER 1: INTRODUCTION
10
TOTAL SYSTEM APPROACH
The UPQ-1P loudspeaker integrates seamlessly with other
Meyer Sound products. With compatible acoustical and per-
formance characteristics and dedicated QuickFly rigging
hardware, the UPQ-1P loudspeaker and other Meyer Sound
self-powered loudspeakers can provide you with everything
you need to design and implement systems for optimum
performance in venues of any size or shape.
TIP: TIP: Meyer Sound MAPP Online Pro™
acoustical prediction software allows you to
quickly determine the coverage, frequency response,
impulse response, and maximum output of Meyer
Sound loudspeakers, and provides useful rigging
information.
In addition to smooth integration with other Meyer Sound
loudspeakers, the UPQ-1P loudspeaker can be supple-
mented with Meyer Sound subwoofers for extended low-fre-
quency bandwidth and headroom. UPQ systems can be
deployed in combination with 700-HP ultrahigh-power sub-
woofers, extending the system frequency response down to
30 Hz.
The 600-HP compact high-power dual 15-inch subwoofer
makes an ideal complement in applications where the power
and features of the 700-HP are not needed.
In addition, the UPQ-1P loudspeaker can be used in combi-
nation with other Meyer Sound subwoofers, such as the
650-P high-power subwoofer.
The UPQ-1P is supported by Meyer Sound’s MAPP Online
Pro acoustical prediction program and the Galileo™ loud-
speaker management system. Once a Meyer Sound system
is designed and installed, its performance can be confirmed
using a SIM
®
3 audio analyzer system.
UPQ-1P Suspended in an MYA-UPQ Mounting Yoke
The 700-HP Ultrahigh-Power Subwoofer
The 600-HP High-Power Subwoofer
To Next Page
Loading...
Need help?
General
