Meyer ELECTRO LIFT E-46 - DISASSEMBLY - E-47 & E-57 MODELS

DISASSEMBLY - E-47 and E-57 MODELS
FIGURE 3-15
A special hex socket, part number 21891, may be
required to remove “B” and “C” Cartridges.
(See Figure 3-67)
FIGURE 3-14
Coils removed from cartridges.
FIGURE 3-16
“B” & “C” Cartridge being removed from valve block.
Clean cartridges by soaking in kerosene.
FIGURE 3-17
A magnetic probe is extremely useful for removal of
small valve parts. This is the 7/16" check ball for “B”
Cartridge being removed.
-37-