How to Use
Sleep mode
The vacuum-mop will automatically enter the sleep mode if it does not
work or be operated for more than 5 minutes in the non-charging state.
Press any buon or use the app to wake it up. The vacuum-mop will
automatically turn off if it is in sleep mode for more than 6 hours.
Note: The vacuum-mop will not enter sleep mode while on the charging dock.
Resuming the cleanup
The vacuum-mop has the feature of resuming the cleanup. If the
vacuum-mop starts running low on baery during a cleaning task, it will
automatically return to the charging dock to charge. Once the
vacuum-mop is fully charged, it will resume the cleanup where it le off. If
the cleanup is manually ended or if you move or operate the vacuum-mop
when it is being charged or returning to the charging dock, the cleanup
will not be resumed.
Returning to the dock to charge
When the vacuum-mop is on, press the buon to send the vacuum-mop
to the charging dock to charge. The vacuum-mop will automatically return
to the dock aer finishing a cleaning task, and the indicator will blink
white. If the vacuum-mop starts running low on baery while cleaning, it
will automatically return to the dock to charge and resume the cleaning
where it le off once it is fully charged.
Turning on/off
Press and hold the buon for 3 seconds until the indicator lights up,
and the vacuum-mop is turned on. When the vacuum-mop is paused and
not being charged, press and hold the buon for 3 seconds to turn it
off.
Vibrating mopping mode
When mopping, the vibrating mopping mode is enabled by default to
enhance the mopping effect, and can beer remove water stains
compared with the standard mopping mode. This mode can be disabled
in the app. Once disabled, the vacuum-mop will switch to the standard
mopping mode.
Vacuuming or vacuuming & mopping
Turn the vacuum-mop on, and press the buon . Then the vacuum-mop
will automatically enter the vacuuming mode or vacuuming & mopping
mode according to the installed accessories.
Quick map creation
When turning on the vacuum-mop for the first time, there is no map
available in the app. Place the vacuum-mop against the charging dock,
and then select "Quick map creation" in the app. The vacuum-mop will
begin to create a map without cleaning, and then it will automatically
return to the charging dock to complete and save the map.
Note: During the map creation process, do not move the vacuum-mop, and keep it
out of reach of children and pets.
Pausing
When the vacuum-mop is working, press any buon to pause it, and
press the buon to resume the cleaning. Press the buon to
end the current cleaning and send the vacuum-mop back to the charging
dock.
Adding water or cleaning mop pad during cleanup
If you need to add more water to the water tank or clean the mop pad
during a cleaning task, press any buon to pause the vacuum-mop. Then
you can remove the water tank to add water or clean the mop pad. Aer
adding water or cleaning the mop pad, reinstall the water tank and mop
pad, and press the buon to resume the cleaning.
11
To Next Page
Loading...
Need help?
General
