Micom 3R - Page 82

MICOM-3F/3T/3R HF-SSB Owner’s Guide
64
5. Press SEL (F4).
Note
If you decide to send a Global AllCall, press GLOB
(F3).
MICOM-3
?
ALL
EDIT:_
6. Type the desired character (only one character is accepted).
Note
You can press ? (F1) if you decide to send a global
AllCall.
MICOM-3
?
CLR
ALL
EDIT:5
7. Confirm your selection by pressing ENTER.
Note
If you decide to send a global AllCall, press GLOB
(F3).
MICOM-3
SEND
PAGE
GLOB
SEL
CALL
SL ALLCALL
8. Press SEND (F1) or ENTER to start the call. The radio starts
sending the selective AllCall.
Note
While the radio is initializing the link, you can press
STOP (F1) or ESC to abort the entire process.
MICOM-3
STOP
TO
SL ALLCALL
MICOM-3
STOP
CH 2
SL ALLCALL
9. After a delay, you will see LINK, and you can start talking.
MICOM-3
PAGE
MON
LINK
SL ALLCALL
I
10. Press PAGE (F2) if you want to send a message. See page 60
for details.
11. To end the call, press ESC.
MICOM-3
END CALLING