Model
ILR1020-6 ILR1021-30 ILR1100-6 ILR1101-50 ILR1150-10 ILR1151-250
Analog output
4 - 20 mA / max. load 500 Ohm no 4 - 30 mA no
Switching points
free adjustable (teach in) adjustable in 1 mm steps
Switching hysteresis
30 mm min. 20 mm (adjustable) min. 10 mm (adjustable)
Power supply
18 - 30 VDC / current consumption (no load operation, U
B
= 24 VDC) < 125 mA /
with inverse-polarity protection
Connection
5-pin connector, M12 12-pin connector, M16
Protection class
IP 67
Dimensions
93 mm x 93 mm x 42 mm
Housing material
ABS shock-resistant
Vibration
10 - 55 Hz, amplitude 1.5 mm, period 5 min. at resonant frequency or 55 Hz,
stress time 30 min. per axis
Shock EN 60947-5-2
Acceleration 30 g, pulse duration 11 ms, half sinusoid, 3 shocks/axis
Weight EN 60947-5-2
approximately 200 g approximately 230 g
1) slow/fast, in the mode, the sensor reaches a higher repeat accuracy with a lower switching frequency.
To Next Page
Loading...
