5.4 Electrical Connection
The sensors contain 5-pin connectors (ILR102x) or 12-pin connectors (ILR11xx). Bending radius of the supply
and output cable (available as an optional accessory, see Chap. A 1):
PC1x 34 mm (once), 84 mm (permanent)
PC11x 47 mm (once), 116 mm (permanent)
+U
B
Switching output
0 V (GND)
R
Last
U
max.
< 2.4 V
Fig. 14 Wiring diagram switching outputs
To Next Page
Loading...
