ESC
DIST mm
127045
In measuring mode the text DIST mm or DIST INCH (depending on unit se-
lected) and the actual measured value are displayed.
Selecting menu items:
Menu items are displayed on the display:
1. < Menu item >
With this display it is possible to switch to another menu item with , or
select the menu point with .
2. Menu item
With this display the keys can be used to alter the value.
ESC
ILR1xxx
Rev. nnnnn
When the sensor is switched on the sensor type and the software revision number
appears for approximately 2 sec.
The software revision number must always be quoted when contacting the
manufacturer with technical queries.
i
The red target laser and the display background lighting are always active in set up mode.
To Next Page
Loading...
