2021 Microchip Technology Inc. DS00003118C-Page 17
AN3118
2.5.1 ADDING A NEW PERIPHERAL
1. From the app, pause the music. Click the Group Setting tab, then select Concert Master. A small window will
pop up. To add a new peripheral, select Add new slave (see Figure 15).
FIGURE 15: ADDING A NEW PERIPHERAL
2. Go to Scan mode, then click Scan. “Waiting for new slave” displays (see Figure 16). Select Concert Slave to
add as a peripheral.
FIGURE 16: SCANNING FOR NEW PERIPHERAL SPEAKERS
3. A new peripheral speaker is added to the central. Click Scan, then select Concert Master. Play music from the
Audio tab (see Figure 13). Music will be heard on the central and peripheral, including the newly added periph-
eral.
To Next Page
Loading...
Need help?
General
