microHAM © 2010 All rights reserved
FSK MESSAGES TAB
On this tab you can define nine FSK messages of up to 50 characters each which are stored in EEPROM.
Each memory may have a programmable repeat delay and/or call another memory.
Commands which may be included in a memory are:
CR & LF: Insert Carriage Return/Line Feed
Figure: Insert special Figure character
Letter: Insert special Letter character
Blank: Insert special Blank character
Letter: Insert special Bell character
Jump to: used for looping a message or calling another message
Delay: sets the delay in seconds before looping or calling another message
Store: saves one message to microKEYER II memory
Store All: saves all messages to microKEYER II memory
Load from File: loads all messages from file
Save to File: saves all messages to file
Messages can also be saved and replayed using an external keyboard attached to the PS/2 jack.
See: External Keyboard.
NOTE: Messages are not saved or loaded with Presets
40
To Next Page
Loading...
Need help?
General
