EasyManua.ls Logo

microHAM microKEYER II - Hardware Specifications

microHAM microKEYER II
57 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
microHAM © 2010 All rights reserved
9 - HARDWARE SPECIFICATIONS
USB: USB 2.0 Full speed, USB 1.1 compatible
Power consumption:
USB – less than 100mA
Power supply – 400mA at 13.8V (max. 16V)
Radio Port: RxD, TxD – max. 57,600 Baud, RTS/CTS handshake supported
Levels: TTL, inverted TTL, open collector bus, RS232
Aux Port: TTL – RxD, TxD, no handshake – 9600 baud maximum
CI-V Port: open collector bus – 9600 baud
CW: open collector, max 30V/400mA
FSK: open collector, max 30V/400mA
- supports 5/6/7 bit data, 1/1.5/2 stop bits, up to 300 baud
PTT1: open collector, max 30V/400mA
PTT2: open collector, max 30V/400mA
PA PTT: selectable by internal jumpers
open collector, max. 45V @ 0.8A
relay contact, max. 48V AC/DC @ 1A
LNA PTT: selectable by internal jumpers
open collector, max. 45V @ 0.8A
relay contact, max. 48V AC/DC @ 1A
Foot Switch: active when closed to ground, max load: 1 mA at 5V
PTT IN: active when closed to ground, max load: 1 mA at 5V
Monitor: Mono, 2 Watts @ 4 Ohm speaker
Audio Out: 600 Ohm, 4V p-p max.
Left channel
AC coupled
Audio In: 50K Ohm, max 4Vpp
dual channel (Stereo)
AC coupled
Dimensions: W 2325mm (9.125") x H 44mm (1.73") x D 105mm (4.125")
Weight: 1.3 kg (1.875 lbs.)
51

Related product manuals