microHAM © 2010 All rights reserved
DISPLAY TAB
The display tab provides controls for configuring the microKEYER II display.
Each line can display one of eight default (background) functions and any of “temporary” status
reports. The “background” functions are those that appear at idle. The status messages appear
depending on operating mode.
Contrast: controls the LCD contrast
Light: sets the LCD backlight brightness
Report time: sets the length of time that transient (status change) reports remain visible
Set Strings: set the “Welcome Message” to be displayed when microKEYER II is initialized.
Set Defaults: returns the display to factory settings
43
To Next Page
Loading...
