4.3. Using an AC Adapter
(special accessory sold separately. Call 1-800-568-4147 to order)
It is possible to operate this blood pressure instrument with an AC adaptor
(output 6 V DC / 600 mA with DIN plug). Make certain that you use an adaptor
which fulfils the legal requirements and electronic requirements in the U.S. (UL
standard)
a) Push the plug into the socket on the back side of the instrument.
b) Push the AC adaptor into a 110 V power socket (U.S. or Canada).
c) Test that power is available by pressing the START button.
Note:
• No power is taken from the batteries while the AC adaptor is connected to
the instrument.
• If the power is interrupted during the measurement (e.g. by removal of the
adaptor from the wall socket), the instrument must be reset by removing the
plug from the instrument.
• Please consult Microlife if you have questions relating to the AC adaptor.
12
To Next Page
Loading...
Need help?
General
