5.5. Memory–displaying the last measurement
The measured result is stored in the instrument until a new measurement is
carried out or the batteries are removed. You can call up the stored value at
any time by holding the START/STOP button for at least 3 seconds while the
device is off.
5.6. Discontinuing a measurement
If it is necessary to interrupt a blood pressure measurement for any reason
(e.g., the patient feels unwell), the START/STOP button can be pressed at any
time. The device then immediately lowers the cuff pressure automatically and
enters sleep mode.
16
To Next Page
Loading...
Need help?
General
