pressing the M-button. To confirm and then set the month, press the SET button.
2. Press the M-button to set the month. Press the SET button to confirm and then set the day.
3. Follow the instructions above to set the day, hour and minutes.
4. Once you have set the minutes and pressed the SET button, the date and time are set and the time
is displayed.
5. If you want to change the date and time, press and hold the Bluetooth/Time button for approx. 7-8
seconds until the year number starts to blink. Now you can adjust date and time settings as described
above.
Caution: Make sure date & time settings is correct on the device. Incorrect settings results
misleading data & time records of the measurements.
Setting the user
This blood pressure monitor is designed to store 120 measurements for each of two users. Memories
are not stored in guest mode.
■ Select the intended user (user 1 or user 2 or guest) by pressing the User indicator button.
■ Before each measurement, ensure that the correct user is selected.
Selecting Standard mode or MAM mode for measurement
Before each measurement, select standard (single measurement) or MAM mode (automatic triple
measurement). In MAM mode, 3 measurements are automatically taken in succession and the result
is then automatically analyzed and displayed.
Because the blood pressure constantly fluctuates, an average blood pressure based on consecutive
measurements is more reliable than based on a single measurement.
■ To select MAM mode, Press and Hold the SET button till 3 to 4 second, the MAM mode-symbol
& “OFF” appears in the display. Press the Memory button to select ON or OFF, then press SET
button to confirm.
■ The bottom, right hand section of the display shows a 1, 2 or 3 to indicate which of the 3
measurements is currently being taken.
■ There is a break of 15 seconds between the measurements. A countdown indicates the
remaining time.
■ The individual results are not displayed. Your blood pressure will only be displayed after all 3
measurements are taken.
To Next Page
Loading...
