Bluetooth® Function
Use the Bluetooth® function to transfer data to «Microlife
Connected Health+» App on a smartphone (Android OS or iOS).
Information available on: www.microlife.com/technologies/connect
Bluetooth® pairing & app setup
1. Open «Microlife Connected Health+» App on the smartphone (Make sure the app is running in the
foreground, not in the background.)
2. Press SET button to turn on Bluetooth® manually to connect device to smartphone.
3. When smartphone finds the device, the smartphone will show a message to pair with the device.
Confirm on smartphone to complete pairing. Cancel to abort pairing.
4. After pairing, the app will show a message to setup the device user selection (1 or 2) to the app
user profile. Confirm to proceed with setup. Cancel to abort setup (if user selection is incorrect).
5. After setup, the device will automatically exchange measurement data and date/time settings with
the app. Bluetooth® turns off automatically after data exchange.
Bluetooth® operations
Automatically turn on Bluetooth®: Bluetooth® will activate automatically after a measurement.
Bluetooth® symbol on display will blink.
Automatically turn off Bluetooth®: Bluetooth® will turn off automatically after 2 minutes if a
smartphone does not connect to the device.
Manually turn on Bluetooth®: Press Bluetooth/Time button to activate Bluetooth®, Bluetooth®
symbol on display will blink.
Manually turn off Bluetooth®: Press ON/OFF button to turn off Bluetooth®.
Bluetooth® status
Bluetooth® symbol blinking slowly: Bluetooth® is activated and waiting for connection.
Bluetooth® symbol not blinking: Bluetooth® connection established.
Bluetooth® symbol blinking rapidly: Bluetooth® connection error.
In case of Bluetooth® connection error, turn off device Bluetooth®, wait for a minute, then
re-try Bluetooth® connection. Refer to chapter «10. Error messages» for details.
To Next Page
Loading...
