Micromeritics 3Flex Pre-Installation Instructions

1 Pre-installation Document Overview
MICROMERITICS INSTALLED INSTRUMENTS ONLY
APPLICATION RELATED ISSUES
To ensure a thorough installation, it will be helpful for Micromeritics to know which types of
samples will be tested. If known, list them in Application Related Issues Checklist on page3 -
5.
Please advise Micromeritics if samples require any pretreatment. If required, do you have the
proper equipment to pretreat your samples? Micromeritics offers application assistance through
our materials analysis laboratory (Micromeritics Particle Testing Authority).
HAZARDS AND PRECAUTIONS
Inform Micromeritics of any on-site conditions that may present hazards to Micromeritics
employees or equipment. Advise Micromeritics of any precautions that need to be taken.
SAFETY MEASURES
Inform Micromeritics of any safety equipment, requirements, or procedures necessary for
Micromeritics employees to enter and install the system at your facility.
PERSONNEL SECURITY CLEARANCE
If security clearances, insurance certificates, or any other special arrangements are required for
Micromeritics employees to enter your facility, see Personnel Security Clearance Checklist on
page3 - 5 to explain. Inform Micromeritics how much advance notice you require to obtain
clearance.
PROJECTED INSTALLATION DATE
Read this entire document carefully. Complete all checklists in this document. Sign and return all
checklists and the form in Dates and Signatures — All Environments on page6 - 1 to
Micromeritics. Micromeritics will contact you to confirm an installation date.
1 - 2
Flex Series Pre-installation Instructions and Checklist
350-42870-01 (Rev H) — Apr 2021

Micromeritics 3Flex Specifications

General

Brand	Micromeritics
Model	3Flex
Category	Measuring Instruments
Language	English