Need help?Do you have a question about the Micromeritics ACCUPYC II 1345 and is the answer not in the manual?
General| Model | ACCUPYC II 1345 |
|---|---|
| Operating Temperature | 15°C to 35°C |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Measurement Principle | Gas Displacement |
| Sample Cell Sizes | 10 cm³, 100 cm³ |
| Data Interface | USB |
| Dimensions (W x D x H) | 38 cm x 51 cm x 38 cm |
Describes the intended applications and primary function of the AccuPyc II pycnometers.
Details the hazardous substances table and EFUP for product components.
Explains the common fields and buttons found across various windows in the analyzer application.
Details how to generate Statistical Process Control (SPC) reports with various options for data analysis.
Describes the fields and buttons used to conduct diagnostic tests, including status and test selection.
Details the steps for calibrating the pressure scale using an external reference device.
Explains how to calibrate the temperature offset using a reference temperature sensor.
Guides users on connecting additional analysis modules to the main control module for expanded functionality.
Lists common causes and actions for troubleshooting when the instrument's power indicator does not light up.
Addresses issues related to incorrect or unstable pressure readings during operation and provides troubleshooting steps.
Provides instructions for setting and adjusting the temperature using the TEC module's digital controller.
Details the process of connecting a circulating bath to the temperature-controlled AccuPyc system.
Guides users through the installation and removal procedures for various MultiVolume inserts and their associated sample cups.
Provides step-by-step instructions for installing the MultiGas assembly onto the AccuPyc instrument.
Explains how to create and configure advanced reports using Python scripts and the mic module.
To Next Page