Micromeritics ACCUPYC II 1345 User Manual

10 About Calibration
CALIBRATE ZERO CELL VOLUME
Unit [n] >Calibration >Zero Cell Volume
Use to calibrate the cell volume offset.
Field or Button
Description
Analysis Conditions
Specify conditions for the calibration.
Click Replace to replace the values with those from an existing
Analysis Conditions file. See Analysis Conditions on page5 - 2.
Cell Volume
Current cell volume (without an insert) or the volume of the selected
insert.
Expansion Volume
Current expansion volume, and the date and time of calibration.
Insert
1 cm
3
unit
n None
n 0.1 cm
3
If None is selected, place an empty sample cup in the chamber.
10 - 4
AccuPyc II 1345 Operator Manual
134-42851-01 (Rev A) — Jan 2021

Micromeritics ACCUPYC II 1345 Specifications

General

Brand	Micromeritics
Model	ACCUPYC II 1345
Category	Measuring Instruments
Language	English