Micromeritics ACCUPYC II 1345 User Manual

RECOVER FROM A POWER FAILURE
Setup parameters and collected data are recorded by the pycnometer in case of a power failure.
These settings will be available when power is restored. If an automatic operation was in progress
when the power failure occurred, it will be canceled when the pycnometer restarts.
Even though the pycnometer saves data during a power failure, any operation should be
restarted to ensure complete results.
RESET THE PYCNOMETER
Use these instructions for keypad installations only. If a computer is attached to the
module, skip this section. All setup functions will be done in the analysis software.
There are two ways to reset the Pycnometer.
n Hold the .(decimal) key on the keypad during power ON. This erases data and setup parameters
except for printer and network settings.
n Hold 5 on keypad during power ON. This resets setup parameters, as well as printers and net-
work settings.
Recover From a Power Failure
AccuPyc II 1345 Operator Manual
134-42851-01 (Rev A) — Jan 2021
12 - 17

Micromeritics ACCUPYC II 1345 Specifications

General

Brand	Micromeritics
Model	ACCUPYC II 1345
Category	Measuring Instruments
Language	English