Micromeritics ACCUPYC II 1345 - Analyzer Status; Show Instrument Log

3 About the Software
ANALYZER STATUS
SHOW INSTRUMENT LOG
Unit [n] >Show Instrument Log
Use to display a log of recent analyses, calibrations, errors, or messages.
Field or Button Description
Add Log Entry [button]
Use to enter information to appear in the sample log report that cannot
be recorded automatically through the application. Click the button
again to enter multiple log entries.
Analysis/
Calibration/
Message [checkbox]
Select the logs to display.
For fields and buttons not listed in this table, see Common Fields and But-
tons on page3 - 2.
Instrument Log
3 - 10
AccuPyc II 1345 Operator Manual
134-42851-01 (Rev A) — Jan 2021