Micromeritics ACCUPYC II 1345 User Manual

2 DATA ENTRY WITH KEYPAD
Use these instructions for keypad installations only. If a computer is attached to the
module, skip this section. All setup functions will be done in the analysis software.
For instructions on configuring the keypad, see the AccuPyc II 1345 Installation
Instructions and Checklist [part number 134-42875-02].
Data can be entered into the system using either a:
n Keypad (or a keyboard). Used if a computer with the analyzer software installed is not con-
nected to the analyzer. In this case, any section of this manual referring to software can be omit-
ted. All instructions specific to the keypad are designated with the keypad icon.
n Computer. Used if the computer with analysis software is installed and connected to the analysis
module. In this case, this section of this manual can be skipped.
2 Data Entry with Keypad
AccuPyc II 1345 Operator Manual
134-42851-01 (Rev A) — Jan 2021
2 - 1

Micromeritics ACCUPYC II 1345 Specifications

General

Brand	Micromeritics
Model	ACCUPYC II 1345
Category	Measuring Instruments
Language	English