Micromeritics ACCUPYC II 1345 - Material Parameters

4 Sample Files
MATERIAL PARAMETERS
File > Open > [.SMP File]
Material parameters are used to report porosity or total solids concentration when using the
Standard analysis method.
Field or Button
Description
Bulk Density / Envelope
Density [selection]
Calculated from a volume that includes pores.
Liquid Density [textbox]
Density of the liquid.
Solids Density [textbox]
Density of the solid sample.
For fields and buttons not listed in this table, see Common Fields and But-
tons on page3 - 2.
Material Parameters for Pycnometry Analyzers
4 - 6
AccuPyc II 1345 Operator Manual
134-42851-01 (Rev A) — Jan 2021