Micromeritics ACCUPYC II 1345 - Specifications for Accupyc

SPECIFICATIONS FOR ACCUPYC II
Temperature
Stable between 15 to 35 °C (59 to 96 °F) .
Temperature-controlled AccuPyc: temperature stability is dependent
upon specifications of the installed circulator.
Recommended range: 15 to 50 °C (59 to 122 °F).
Humidity 20 to 80% relative (non-condensing)
Indoor/Outdoor Use
Indoor only
Altitude: < 2000 m
Pollution degree of the intended environment: 2
Operating Pressure 152 kPa(22 psi) max
Environment
Analysis Module
(1, 10, 100 cm
3
)
Height: 20 cm (7.9 in.)
Width: 22.2 cm (8.7 in.)
Depth: 36.2 cm (14.3 in.)
Weight: 7.9 kg (17.4 lbs)
Weight: 8.2 kg (18.1 lbs), high pressure unit
Analysis Module
(350 cm
3
)
Height: 25.9 cm (10.2 in.)
Width: 22.2 cm (8.7 in.)
Depth: 36.2 cm (14.3 in.)
Weight: 10.5 kg (23.2 lbs)
Analysis Module
(2000 cm
3
)
Height: 43 cm (17 in.)
Width: 27 cm (10.6 in.)
Depth: 36.2 cm (14.3 in.)
Weight: 26 kg (57 lbs)
Physical
Specifications for AccuPyc II
AccuPyc II 1345 Operator Manual
134-42851-01 (Rev A) — Jan 2021
1 - 11