Micromeritics ACCUPYC II 1345 - Sequence Analysis

6 Perform an Analysis
SEQUENCE ANALYSIS
Unit [n] > Sequence Analysis
Use to analyze the same sample using different sample files.
Field or Button
Description
Chamber Insert
[selection]
Select the chamber insert to be used for analysis.
Pause between
analyses [checkbox]
When this option is selected, the system will return to the sample selec-
tion window after each analysis. Click Start to run the next analysis.
As each analysis is run, the sample file is removed from the Samples
Files list box.
Report After Analysis
[button]
Generates reports automatically to the specified destination when
each analysis completes.
For fields and buttons not listed in this table, see Common Fields and But-
tons on page3 - 2.
Sequence Analysis
6 - 8
AccuPyc II 1345 Operator Manual
134-42851-01 (Rev A) — Jan 2021