VacPrep 061 Description
Feb 2013 1-1
1. INSTALLATION
Description
The VacPrep 061 Degasser prepares samples for adsorption analysis. Moisture and other con-
taminants are removed by heating the sample while using any of the following methods:
• applying a vacuum to the sample
• passing a flowing gas over the sample
• using an alternating combination of vacuum and flowing gas techniques
The degasser has six heating stations for degassing samples and six cooling stations. The
desired degassing temperature is easily set and checked at the temperature controller located
on the front of the instrument. Control valves are readily accessible and provide a constant
indication of the valve state. A built-in vacuum gauge provides a constant indication of the
system vacuum.
Figure 1-1. VacPrep 061 Degasser
To Next Page
Loading...