Micronta 22-195A - FUSE REMOVAL PROCEDURE; Fuse Removal Procedure

34
Fuse Replacement
WARNING: TO AVOID ELECTRICAL SHOCK,
DISCONNECT THE TEST PROBES BEFORE
REMOVING THE BATTERIES OR FUSE.
REPLACE ONLY WITH THE SAME TYPE OF
BATTERIES OR FUSE. THIS UNIT CONTAINS
NO USER-SERVICABLE PARTS. DO NOT
REMOVE THE BACK COVER.
CAUTION: FOR CONTINUED PROTECTION
AGAINST FIRE OR OTHER HAZARD,
REPLACE ONLY WITH 0.5A, 250V FUSE
(CAT. NO. 270-1241). ONE SPARE FUSE
COMES SUPPLIED WITH YOUR UNIT.
1. Be sure POWER is OFF and test leads are
disconnected.
Ji QUHBBBBU.S.
Sua seen nee cw
2. Open the battery/fuse compartment cover.
3. Pull the red ribbon in the fuse compart-
ment; the fuse will pop out.