Micronta 22-195A - BUZZER SWITCH OPERATION; Buzzer Alerts and Warnings; Buzzer Behavior Notes

32
BUZZER SWITCH
Whenever the BUZZER switch is pressed in,
the meter will emit a short beep each time a
function switch, range or other switch is
pressed and activated (except the PNP-NPN
switch).
E Y Je 7
Froan
EM -
IN
When the input data exceeds the maximum
rated value, short intermittent beeps will
sound as a warning.
During memory operations, a beep will sound
each time either the maximum or minimum
values are renewed.
As maximum value As minimum value is
is renewed . . ... renewed .....
short intermittent long beep
beep
Press BUZZER a second time to turn off the
buzzer feature.
Note: When the meter is in the CONTinuity
check mode, the buzzer will sound regardless
of the BUZZER switch position. Buzzer will
not sound when a range change is made au-
tomatically.