Micronta 22-195A - DATA HOLD FUNCTIONALITY; Freezing Display and Data; Data Hold Limitations

DATA HOLD
Press the DATA HOLD switch to "freeze" all
indications on the display. "DH" is displayed
and any values stored in memory are re-
tained, even if you remove the probes from
the circuit.
Press DATA HOLD again to cancel DATA
HOLD. Pressing a FUNCTION button may can-
cel DATA HOLD.
In the current ranges, switching the 300mA
and 10A function switch may not cancel
DATA HOLD sometimes.
The DC/AC function switch does not cancel
the DATA HOLD in kQ, CONTinuity, >œ check
and hee modes.
During data hold, the RANGE CONTROL and
START/RESET switches are inoperative.
31