Micronta 22-195A - MEMORY FUNCTION USAGE; Activating and Using Memory

26
Memory Function
The maximum and minimum values of a
changing input can be stored and recalled on
the digital display.
1. Push the START/RESET switch in to acti-
vate this function. "M" is displayed on the
LCD. ==
MEMORY
= START VALUE
TTI 1
Ly Ly [Ll
ARESET MIN MAX
t START
2. Push MAX to display the maximum value.
A will flash on the display.
MEMORY
START VALUE
MRESET MIN MAX
U
3. Push MIN to display the minimum value. V
will flash on the display.
MEMORY
= START VALUE
I
AR RESET MIN MAX
The digital display of the maximum and mini-
mum shows only three significant digits. The
first two significant digits indicate accurately
the measured amount. The third significant
digit is rounded to either O or 5. The follow-
ing are representative samples of possible
MAX and MIN displays.
25.0
23 50
23.5
16.5
20 00
Note: After pressing MIN or MAX for display
of the stored value, pressing MIN or MAX a
second time will restore the display to a
readout of the present measurement without
disturbing the memories.