Micropelt MLR003 - User Manual

Copyright Micropelt
Heating Radiator Thermostat
MLR003RiEU61-07-1.1
LoRaWAN CLASS A EU868MHz SF7BW125
User Manual and Device Specification


The Micropelt MLR003R product series has been designed for use with heating radiators and M30x1,5
valve thread. LoRaWAN allows to control heating radiators over long distances, even inside buildings.
Significant cost savings on labor and material cost for wiring, network infrastructure, buildingstructural
changes will reduced the amortization time over conventional systems while installing the system is only
a matter of days.



For inquiries please visit us at:  Customer Service Portal
Email: info@micropelt.com Telephone +49 7665 932183 0

Micropelt MLR003 Specifications

General

Accuracy	±0.1 °C
Dimensions	3mm x 3mm x 3mm
Operating Voltage	1.8V to 3.6V
Current Consumption	5µA
Output Type	Digital

Summary

Use and Safety MLR003 R

General Description MLR003 R

Operating Modes MLR003 R

Power management MLR003 R

Energy Harvesting

Details how the actuator obtains electrical energy from temperature differences.

Device power management

Explains monitoring and computation of energy status via device parameters.

Energy Storage

Information on the unit's energy storage status and low energy indicators.

Forced Heating MLR003 R

Communication Profile MLR003 RIEU61-07-1.1

0 x01 Valve position % mode, Temperature setpoint mode

Controls valve position and temperature setpoint modes.

FPORT 0 x01 UPLINK: MLR003 RIEU61-07-1.1 to Controller; Network Server

Details uplink data format from device to server.

FPORT 0 x01 DOWNLINK: Controller; Network Server to MLR003 RIEU61-07-1.1

Details downlink data format from server to device.

Operating Instructions MLR003 R

User Interface functionality

Setting up a Gateway

Step-by-step guide for configuring a gateway for the device.

Pairing the Device with a Room Controller or Gateway

Instructions for pairing the device with a MultiTech gateway.

Mounting Position and OFF

Attaching and Activating a unit

Procedures for physically attaching and activating the device.

Reset (from Normal Operation only)

Temperature Control Loop

Battery Charging Flow Chart