Microsoft Surface Go 3 User Manual

2 Initial Setup
Setup procedure when starting up the Surface for the
first time (3/6)
16 The “Please Confirm
License Agreement” screen
will appear.
17 Check the contents.
18 Tap “Agree.”
19 The “Who will use this
device?” screen will appear.
20 Enter the user (*) who will
manage this Surface in the
“Name” field.
21 Tap “Next.”
* The user created in the “Who will use this device?” screen is the
user who will configure the settings of the Surface. You can sign in
even when you are not connected to Wi-Fi. In this document, we will
refer to this user as “administrator user.”
* The administrator user can give any name, but be sure to enter it
using single-byte alphanumeric characters. Hiragana, Katakana, and
Kanji are not available.
In addition, the following characters cannot be used.
<, >, : ,“, /, ¥, |, ?, *, @, CON, COM1-COM9, LPT1-LPT8, NUL and
PRN
22

Microsoft Surface Go 3 Specifications

General

Display Size	10.5 inches
Resolution	1920 x 1280
Aspect Ratio	3:2
Touch	10-point multi-touch
Processor	Intel Pentium Gold 6500Y or Intel Core i3-10100Y
RAM	4GB or 8GB LPDDR3
Storage	64GB eMMC or 128GB SSD
Operating System	Windows 11 Home in S mode
Battery Life	Up to 11 hours
Weight	1.2 lbs (544 g)
Graphics	Intel UHD Graphics 615
Microphones	Dual far-field Studio Mics
Speakers	2W stereo speakers with Dolby Audio
Bluetooth	Bluetooth 5.0
Ports	1 x USB-C, 3.5 mm headphone jack, 1 x Surface Connect port, Surface Type Cover port, MicroSDXC card reader
Front Camera	5.0 MP with 1080p HD video
Rear Camera	8.0 MP with 1080p HD video
Dimensions	245 x 175 x 8.3 mm
Wi-Fi	Wi-Fi 6 (802.11ax)
Security	Windows Hello face authentication