Microsoft Surface Go 3 - Replacing Consumable Parts

4 If you think your device is broken
Replacing consumable parts
1 Rotate the cap (red frame) to
remove the battery (AAAA) from
inside.
2 Replace the battery and
reinsert it.
3 Please purchase AAAA
batteries from an electronics
store.
4 If the problem persists even
after replacing the battery,
please contact the Repair and
Support Center for repair.
1 Pinch the nib with tweezers or
similar and pull it out.
2 Insert a new nib into the tip of
the pen.
3 If the problem persists even
after replacing the nib, or if there
are no nibs to replace, please
contact the Repair and Support
Center for repair.
This section explains replacing consumable parts.
The Classroom Pen 2 runs on batteries. If it stops working, replace
the batteries.
If the nib of the Classroom Pen 2 is worn out or crushed, replace it.
62