Microsoft Surface Go 3 User Manual

3 Tasks after initial setup
About this chapter
This chapter describes the following steps required after the initial
setup.
・Connecting to a different Wi-Fi network
・Setup procedure for Windows Hello (face recognition)
・Setup procedure for app and browser controls
・Procedure for performing Windows Update manually
・Procedure for setting the Windows Update execution time
Please note:
1 Please check the Wi-Fi SSID and security key in the manual of
the Wi-Fi you are connecting to.
2 The Wi-Fi SSID and security key are unique for each household,
so the inquiry desk will not be able to assist you with these.
Explanation of this chapter and notes
38

Microsoft Surface Go 3 Specifications

General

Display Size	10.5 inches
Resolution	1920 x 1280
Aspect Ratio	3:2
Touch	10-point multi-touch
Processor	Intel Pentium Gold 6500Y or Intel Core i3-10100Y
RAM	4GB or 8GB LPDDR3
Storage	64GB eMMC or 128GB SSD
Operating System	Windows 11 Home in S mode
Battery Life	Up to 11 hours
Weight	1.2 lbs (544 g)
Graphics	Intel UHD Graphics 615
Microphones	Dual far-field Studio Mics
Speakers	2W stereo speakers with Dolby Audio
Bluetooth	Bluetooth 5.0
Ports	1 x USB-C, 3.5 mm headphone jack, 1 x Surface Connect port, Surface Type Cover port, MicroSDXC card reader
Front Camera	5.0 MP with 1080p HD video
Rear Camera	8.0 MP with 1080p HD video
Dimensions	245 x 175 x 8.3 mm
Wi-Fi	Wi-Fi 6 (802.11ax)
Security	Windows Hello face authentication