Need help?Do you have a question about the Microtech Xpress and is the answer not in the manual?
General| Brand | Microtech |
|---|---|
| Model | Xpress |
| Category | Disc Duplicator |
| Language | English |
Provides an overview of the Xpress system, its setup, configuration, and usage.
Identifies and describes the main components of the Xpress production system.
Details the front panel controls, including the power switch and indicator lights.
Lists the physical dimensions and weight of the Xpress system.
Outlines the requirements for the environment where the Xpress system will be operated.
Instructions for verifying shipment contents and checking for shipping damage upon arrival.
Describes the basic Xpress configurations and how to handle the unit during unpacking.
Lists the components included in each box for the Xpress system.
Provides step-by-step instructions for assembling the Xpress system.
Guides the user on how to start and log into the Xpress system.
Explains the important icons and parts of the Xpress system's desktop interface.
Details how to verify and configure the Xpress software settings.
Instructions for running a quick initial test to check disc-transporting functions.
Outlines the procedure for testing the system by making actual disc copies.
Explains the operator's role in loading blank discs and removing finished ones from the spindles.
Provides instructions for properly shutting down the Xpress system.
Details the process of adjusting the disc production system for smooth operation.
Provides troubleshooting steps and contact information for Microtech Systems support.
To Next Page