E-mail button
1. Press the E-mail button on your scanner. This will automatically scan
and deliver your image(s) to your e-mail editor, based on the MSC
settings. The saved images are stored in your local disk. They also
appears as a shortcut under My Images folder on your desktop.
2. To scan another image or successive images using the same setting,
press the E-mail button again. Repeat this until all scanning tasks
are completed, or until you need to specify the settings for the next
job.
3. To customize the parameters for the E-mail button, specify your
settings (Scan Type, Purpose, Destination, etc.) under the
E-mail tab
of this MSC utility.
To Next Page
Loading...
