ScanMaker i700 Installing and Getting Started 7
Scanning Regular, Non-Damaged Photos
1. Raise the scanner lid, and place the photo to be
scanned face down on the scanner glass
surface.
The top end of the photo should be positioned
towards the back of the scanner.
Note: To accurately perform an auto-crop
preview of the photo loaded onto the scanner,
make sure the Black Mat is attached on the
scanner lid (Light Plate) before launching
ScanWizard 5.
Resize the scan
frame to adjust
the actual size of
your scan
• Allows you to switch to the
Advanced Control Panel
• Shows the scanner type,
model, and status
• Contains the built-in
ScanWizard 5 help
• Exits ScanWizard 5
• Minimizes ScanWizard 5
(Windows only)
Selections and options for
image settings
The Black Mat
comes
preattached to the
scanner lid.
2. Double-click the ScanWizard 5 icon ( ) on your desktop to launch the
ScanWizard 5 Standard Control Panel.
When ScanWizard 5 launches, it automatically performs a fast preview of the
material on your scanner glass surface and displays it in the preview area.
3. In the preview window, you can resize the scan frame (floating dotted line)
around the image by dragging on the edge or corner of the scan frame to
determine the final size of the actual scan.
4. Click the Original button, then select Photo.
5. Click the Scan to button to scan the image.
After the scan, the scanned and processed image can be saved as a file, opened in
an image-editing program, sent to a printer, attached in an e-mail, or uploaded to
a website.
To Next Page
Loading...
Need help?
General