8 ScanMaker i700 Supplement
Scanning Scenarios
The following pages provide various scenarios for scanning with the ScanMaker
i700, including the following:
• Scanning regular, non-damaged photos (1): This scenario can also be your first
scan in order to familiarize yourself with scanning basics. It makes use of the
Standard Control Panel in ScanWizard 5.
• Scanning regular, non-damaged photos (2): This scenario is similar to above but
uses the Advanced Control Panel in ScanWizard 5.
• Scanning damaged photos: This scenario utilizes DIGITAL ICE for reconstructing
damaged photos. Three methods are available for launching this function:
through the DIGITAL ICE button on the front panel of the scanner; through the
Automatic Reconstruction option; and through the Manual Reconstruction
option. The last two methods are accessed through the Advanced Control Panel
in ScanWizard 5.
• Scanning regular, non-damaged film: This scenario utilizes the various EZ-Lock
Film Holders to scan a variety of film, slides, and transparencies. It makes use of
the Advanced Control Panel in ScanWizard 5.
• Scanning damaged film: This scenario utilizes DIGITAL ICE for correcting flaws
that may be present in your slides, negatives, and transparencies. It makes use of
the Advanced Control Panel in ScanWizard 5
To Next Page
Loading...
Need help?
General