Channel Equalisation
The Verona’s multifunction channels each have treble and bass
shelving EQ and hi and lo-mid sweep EQ stages for tonal control.
- The treble shelving EQ gain is continuously variable from -15dB to +15dB.
- The Hi-mid gain is continuously variable from -15dB to +15dB.
- The centre frequency of the hi-mid EQ is continuously variable from
600Hz to 8kHz allowing the operator to select the desired centre frequency for the equaliser.
- The bass shelving EQ gain is continuously variable from -15dB to +15dB.
The channel equalisation stages are enabled by depressing the EQ on switch.
Otherwise the settings of the channel EQ will have no effect.
- When depressed, auxiliary sends 1 through 6 will be sourced pre-
equalisation. Otherwise auxiliary sends will be sourced post EQ. The use of this option depends
upon how the auxiliary sends are to be used.
Treble
Hi-Mid Gain
Hi-Mid Frequency
Bass Gain
EQ On -
EQ Off (aux Pre)
Lo-Mid Frequency
Lo-Mid Gain
- The centre frequency of the lo-mid EQ is continuously variable from
100Hz to 1.2kHz allowing the operator to select the desired centre frequency for the equaliser.
- The Lo-mid gain is continuously variable from -15dB to +15dB.
Aux sends 7-8 can be linked to the pre EQ off
switch, as well as 1-6, via an internal jumper (refer to the service manual or contact your
authorised Midas service agent).
100
-15
-15
-15
-15
+15
+15
+15
+15
treble
bass
eq
on
eq
aux pre
off
300
500
600
3k
8k
1k2
1k5
hi-mid
lo-mid
Operators Manual - Page 15
Multi Function Input ChannelsMulti Function Input Channels
mic gain
100
-15
-15
-15
-15
+15
+15
+15
+15
+30 +45
+60+15
mic
padpower
48V -15
mono
wide
stereo
0
0
0
0
0
0
0
0
+6
+6
+6
+6
+6
+6
+6
+6
image
line gain
treble
bass
stereo
hi-pass
80Hz
pan
c
l
+20
0
r
groups
pan
mute 1
mute 2
mute 3
mute 4
aux 1
aux 2
aux 3
aux 4
aux 8
mono
groups
stereo
1-2
5-6
7-8
3-4
pre
pre
aux 7
aux 6
aux 5
O
-18
0
12
18
eq
on
eq
aux pre
off
MIDAS
ins
300
500
600
3k
8k
1k2
1k5
hi-mid
lo-mid
SOLO
MUTE
10
10
5
5
0
20
15
30
40
To Next Page
Loading...
