To Next PageTo Next Page
Need help?Do you have a question about the Midas Venice F16 and is the answer not in the manual?
General| Channels | 16 |
|---|---|
| Faders | 16 |
| Microphone Preamps | 16 |
| Inputs - Line | 16 |
| Aux Sends | 4 |
| Subgroups | 4 |
| Phantom Power | Yes |
| Fader Length | 100 mm |
| Type | Analog |
| Inputs - Other | 2 |
| Outputs - Main | 2 |
| Outputs - Other | 4 Aux Sends, 4 Subgroups |
| Connectors | XLR, 1/4" TRS |
| Weight | 18 kg |
Crucial safety guidelines for operating the audio mixing console.
General introduction to the VeniceF console and its capabilities.
Highlights the main functionalities and specifications of the VeniceF consoles.
Explains how to connect external audio equipment to the console.
Illustrates the path of audio signals through the console.
Introduces the layout and functions of a single mono input channel.
Explains how to adjust input signal levels and use gain-related features.
Explains the four-band swept EQ controls for tonal adjustments.
Details pan, routing options, mute, and solo functions.
Introduces the layout and functions of dual stereo input channels.
Explains gain adjustment for stereo mic inputs, including phase.
Details gain control, solo, and routing for stereo line inputs.
Explains the fixed four-band EQ for stereo channels.
Introduces the main areas of the console's output section.
Details the four group buses, their outputs, inserts, and controls.
Explains the two matrix outputs for additional speaker zones or effects.
Covers the monitor output sections and their controls.
Details the stereo master output section and its controls.
Comprehensive list of technical data for F16, F24, and F32 models.
Guidance on setting input gain for optimal signal-to-noise ratio.
Explains headroom and its importance for preventing distortion.
Notes on using compressors and limiters to manage signal dynamics.
Emphasizes the importance of proper electrical safety and grounding.
Explains the cause and effects of ground loops in audio systems.
Provides methods to minimize noise and improve grounding.
Explains how to use ground lift switches to isolate signal grounds.
Recommends regular checks for optimal console performance.
Provides instructions on how to safely clean the console.
Refers to Appendix E for ground loop problem solutions.
